ATIFLASH
========
Error list and troubleshooting guide.


0FL01  Error programming ROM 
----------------------------
- Check that the command line arguments you passed are correct.
- Check that the BIOS image file specified exists and isn't corrupted.
- Check that the ROM isn't write protected.
- If a parameter in the BIOS image file differs from a parameter in the
  current ROM image (e.g. SSID), and you're sure you want to program
  the image, specify the -f (force) flag on the command line.


0FL02  Error accessing ROM 
--------------------------
- Check that the command line arguments you passed are correct.
- Check that the ROM connections on the board are secure.


0FL03  Error in checksum 
------------------------
For a BIOS image file:
- Check that the checksum you specified on the command line is correct.
- Check if your BIOS file has been corrupted.

For the board BIOS:
- Check that the checksum you specified on the command line is correct.
- Try programming the BIOS again.

For the board ROM:
- Check that the checksum you specified on the command line is correct.
- Check that the size you specified on the command line is correct.
- Verify that the extra non-BIOS contents of the ROM are correct.
- Try programming the BIOS again.


0FL04  Error verifying ROM 
--------------------------
- Check that the command line arguments you passed are correct.
- Check that the BIOS image file specified exists and isn't corrupted.
- Check that the BIOS programmed into the ROM is the same as the one
  specified on the command line.
- Try reprogramming the ROM with the BIOS image.


0FL05  Error modifying SSID / BIOS
---------------------------
- If using -mi check that the command line arguments you passed are correct.
- If using -mb check that the contents of file you passed are correct.
- Test the rom access (atiflash -t <adapter num>).
- Check that the ROM isn't write protected.
- Check that the BIOS programmed into the ROM isn't corrupted.
- Try reprogramming the ROM, then modifying the SSID again.