5/19/95
                         =============================
                         | S3 Windows NT 3.1 Drivers |
                         =============================

Installation Considerations:
---------------------------
1. Begin the installation process in standard VGA mode. To do this, click on the
   Windows NT Setup icon and choose Standard VGA from the list of display
   options.

2. If drivers other than for standard VGA have been previously installed, change
   to the \WINNT\SYSTEM32 subdirectory and delete all .INF files with names
   starting with OEMVIO, i.e.,

   del OEMVIO*.INF

Installation Instructions:
-------------------------
1. Now, the drivers are located in a floppy disk ( i.e. Windows NT 3.1 Driver
   Disk ), after the steps of Section " Decompressing Drivers " in Chapter
   " Software Installation " of manual completed.

1. Click on the Windows NT Setup icon to start the setup program.

2. Access the "Display" box.

3. Choose "Other (Requires a disk from a hardware manufacturer)" from among the
   list of driver options.

4. Insert the diskette containing the S3 Windows NT driver(i.e. Windows NT 3,1
   Driver Disk) into your diskette drive.

5. Select the desired resolution.

6. Shut down the system and restart Windows NT.
