===============================
FastTrak Utilities Installation
===============================

There are two utilities for the FastTrak PCI RAID
controller - UltraTune and FastCheck.

The UltraTune utility allows you to optimally 
configure the FastTrak for your system and applications.

The FastCheck utility is used to monitor or perform maintenance
on a FastTrak Mirrored (RAID 1) or Striped/Mirrored (RAID 0/1) 
array. Visual and audible messages are available to warn of 
possible problems with the disk array or controller. This utility
runs under Windows 95, Windows NT 3.51, and Windows NT 4.0.

ULTRATUN.TXT contains instructions on using the UltraTune utility.
FASTCHEC.TXT contains instructions on using the FastCheck utility.


============
Installation
============

From the Start Button, choose the Run button. In the Run dialog
box, type in "A:\SETUP.EXE" and click "OK". Under Windows NT
3.51, from Program Manager go to the "File" menu and then choose
"Run". In the Run dialog box, type in "A:\SETUP.EXE" and click 
"OK". (NOTE: UltraTune will not run under Windows NT 3.5x).

Follow the directions from the setup program.
You may choose a complete install, which will install both utilities,
or a custom install in which you can choose which of the utilities
you wish to install. If you will be installing the FastCheck utility
Promise recommends to load the utility during startup. This ensures
you that it will be ready to post alerts on errors. During 
installation, click "Yes" when prompted to run the utility on every 
startup. The utility will appear minimized as a taskbar tray 
icon and does not take desktop space. If no is answered it will 
not run during startup. You may manually run the utility through 
the Start button.

For Windows NT 4.0, setup will install both the FastTrak device 
driver and the FastCheck utility. To install the FastTrak device 
driver for all other operating systems, please refer to the 
FastTrak manual.


