
	ADVANCD CD-ROM Driver
	=====================

Command Line Options


/P 
Pause after driver load.

/V
Verboses device information.

/L
Specifies that ADVANCD should scan for logical units.  (By 
default, logical units are not scanned)

/D:name    
Specifies the device name given the driver in your CONFIG.SYS 
file for use with your CD-ROM interface software.  (The 
default device name is ADVCD0, which will apply to all 
connected CD-ROM drives.)

A line

DEVICE=C:\path\ADVANCD.SYS 

should be added to CONFIG.SYS or one can run our  DOS install or WINDOWS Setup. (WINDOWS SETUP should not be run in WIN 95 system, WIN 95 has its own CD-ROM driver build in)

A line 

MSCDEX.EXE /D:ADVCD0

Should be added to AUTOEXEC.BAT
The /D parameter provides MSCDEX with the device name assigned 
to the CD-ROM driver. The MS-DOS drive letters assigned to the 
CD Drive(s) start after the last logical hard disk drive.  
Additional information on MSCDEX.EXE usage is available in the 
Programmers Guide for MSCDEX or directly from on-line help in 
MS-DOS 6.X.  

Note - The Windows and DOS based install programs will take 
care of installing ADVANCD and MSCDEX, plus make all needed 
modifications to CONFIG.SYS and AUTOEXEC.BAT.

	CD-ROM Driver Operation
	=======================

An MS-DOS CD-ROM driver is a translation layer that fits 
between the Microsoft CD-ROM extensions (MSCDEX) and the 
hardware-specific device manager (ADVASPI).  It translates 
CD-ROM commands to ASPI commands, then translates ASPI 
completion to CD-ROM completion.  It is normally called by 
MSCDEX, but can be called directly from applications.  For more 
information, see the MSCDEX programmers specification published 
by Microsoft.

	What's New
	==========
Allows to read multi-session on Philips CDD2600.
Allows Toshiba 12x to work.
Also supports software eject for DOS and WINDOWS 3.1
Faster boot to DOS.

	Technical Support
	=================

For Further information on using the ADVANCD software, 
configuration program, Mosel Host Adapter or this install 
program please refer to your Mosel SCSI manual or contact 
Mosel Technical Support:



---------------------------------------------------------------------
How to reach MOSEL 
---------------------------------------------------------------------

    Phone:              415-342-2579(USA)
			886-2-577-7726(Taiwan) 
    FAX:                415-342-8261(USA)
			886-2-577-5628(Taiwan) 
    Tech Support:       415-342-2579(USA)
			886-2-577-7726(Taiwan) 
    Email:		support@mtmosel.com 
    World Wide Web	http://www.mtmosel.com


