	          3 Mode Floppy Driver For WinNT
		  -----------------------------------

    1. Requirements when using 3.5" 1.2 MB diskette

	   H/W		3-mode type diskette drive
	   S/W		3MDFDD.INF to provide information for the installation
                        FLOPPY.SYS is discribed in the 3MDFDD.INF file. 
                        SETUP.EXE is the installation program.
	   MEDIUM	2HD 3.5" diskette

	
    2. How to install the driver:

	2.1 Using Start/Run to execute installation program.
	
	2.2 Type D:\3mode\nt\Setup.exe and a dialog will pop up to confirm the
            driver installation.

        2.3 After the installation, you will need to restart the machine.

    3. Format a new floppy diskette:

	1. Click "My Computer" and select "Removable Disk [A:]" or
           "Removable Disk [B:]".

	2. Select File/Format to open the format dialog to.

	3. Select "Capacity" to format the following floppy types:
	   (a) 3.5", 1.23MB, 1024 bytes/sector
	   (b) 3.5", 1.2MB,  512  bytes/sector

    When the installation is successfully, the system will show 
    reboot message and the driver will be load at system reboot.
    You can read and write 3-mode diskette and 1.44M diskette in the
    same disk drive, and you don't need the logic drive.

