16-bit real-time hardware compression/decompression enables sound samples to be reduced to
manageable file sizes without loss of quality
8- and 16-bit selectable stereo sampling and playback rates from 4kHz to 44.1kHz stereo
16-bit real-time hardware compression/decompression enables sound samples to be reduced to
manageable file sizes without loss of quality
Recording sources include microphone, stereo line-in, CD-audio, MIDI
DOS and Windows-based mxier applications
All recording sources can be mixed, left and right channels can be swapped or mixed
Full software control of recording and playback levels, treble, bass, input and output gain
20-voice, 4-operator FM synthesizer
Backward compatible for complete support of existing applications
64-byte FIFO, full duplex
MIDI timestamp
Supports MPU-401 UART And Sound Blaster MIDI standards
Share joystick port
MIDI adapter and sequencer software optional
Connect up to seven SCSI devices including CD-ROM drives and hard disks
Uses Adaptec's AIC6360 SCIS-2 controller
Adaptec EZ-SCSI software included - connecting SCSI devices has never been easier
Supports SCSI devices which do not require a boot ROM
External SCSI devices require optional adapter
MIDI interface doubles as joystick port
Connect any IBM-compatible joystick
Dual joystick and MIDI adapter cables available as options
Selectable Automatic Gain Control
Input impedence: 600 ohms
Sensitivity: 10-200mV
Ergonomic, hands-free microphone included
4 watts per chanel (PMPO)
Load impedance 4 ohms or more
Drives any speakers, home stereo, personal stereo headphones directly
Mini stereo jack-to-RCA conversion cable included
Line input
Microphone Input
Speaker output
Line output
15-pin MIDI/joystick connector
CD audio input
CD-ROM interface (for use with Creative Labs CD-ROM drives)
PC internal speaker input
80386 or higher processor
2MB RAM recommended
16-bit slot
DOS 3.1 or higher
Windows 3.1 (for Windows software)
EGA or VGA (VGA recommended)
Speakers or headphones
©1995
Creative Labs Europe