.TOPIC:
Contents

                        Accton Technology Corporation
                  EN1207-TX Series PCI Fast Ethernet Adapter
                    Netware MSL driver Installation Guide

A. Preparation
   -----------
     Before running Accton EN1207-TX Series MSL driver, you should prepare
                i). a cross-over cable,
               ii). two EN1207-TX Series adapters.

B. Configuration
   -------------

          +---------------------+               +---------------------+
          |                     |               |                     |
          |       Netware       |               |       Netware       |
          |   SFT III Server    |               |   SFT III Server    |
          |  Primary IOEngine   |               |  Secondary IOEngine |
          |                     |               |                     |
          |        +------------|  Cross-over   +------------+        |
          |        | EN1207-TX  |    Cable      | EN1207-TX  |        |
          |        | Series     |<------------->| Series     |        |
          |        +------------|               +------------+        |
          |                     |               |                     |
          +---------------------+               +---------------------+


C. Activate MSL driver
   -------------------
        1. Copy AC4XMSL.MSL from EN1207-TX Series driver diskette to the SFT
           III system directory (ex: C:\NWSERVER) in your Mirror Servers,
           respectively.

        2. From Primary IOEngine Console, type the following command to load
           EN1207-TX Series MSL driver,

                LOAD AC4XMSL SLOT=1

           The keyword SLOT identifies which EN1207-TX Series adapter is used
           in the server.  Slot value 1 represents the first EN1207-TX
           Series adapter. While 2 represents the next one, etc.

        3. From Secondary IOEngine Console, type the above command again to
           load the MSL driver on the secondary SFT III Server.  After that,
           the IOEngine Console should prompt a message that notified user
           Mirror Server Link has been estabilished.

        4. Now, you can startup the MSEngine by entering the command
           "ACTIVATE SERVER" on the Primary IOEngine Console.



