
								2/20/1997
	       SCO UNIX Accton EN1208 PCI MDI Driver
	       =====================================


The following files will be used in this installation:

Files	       Contents
-----------    -----------------------------------------
Driver.o       Accton EN1208 PCI Driver
setup	       Transfer dos format to unix format setup program
Master	       Used by netconfig
System	       Used by netconfig
Node	       Used by netconfig
Space.c        Used by netconfig
space.h        Used by netconfig
lkcfg	       Used by netconfig
AOF/r3e        Used by netconfig



1.  Installation Diskette in DOS format.
    Put Accton EN1208 SCO UNIX Driver diskette to floppy A:
    and use doscp command to copy Accton EN1208 SCO UNIX PCI Driver
    into UNIX's directories.

       # doscp A:/sco5/setup  /setup
       # chmod +x /setup
       # ./setup


2.     Use netconfig utility

       Avaiable options:

       # netconfig

3.  To add adapters, select "Add New Lan Adapter" from "Hardware".

4.  Add Protocol to select SCO TCP/IP.

5.  Enter the internet Address of this interface	n.n.n.n

6.  Enter the netmask for this interface		(default 255.255.255.0)

7.  Enter the boardcast address for this interface	default: n.n.n.n

8.  Do you want to relink to kernel now ?		y

9.  Do you want this kernel to boot by default (y/n)	y

10. Do you want the kernel environment rebuilt (y/n)	y

11. Reboot unix

	# shutdown -y -g0

