                   Accton EN1657/8-P PnP ISA Adapter
                   SOFTWARE INSTALLATION INSTRUCTIONS
                   FOR OS/2 NOVELL ODI CLIENT DRIVER

Copyright (c) 1996, 1997 by Accton Technology Corporation.
All rights reserved.

 File Description
 ----------------

 Filename       Description
 ------------   ---------------------------------------
 OS2MLID.SYS    ACCTON EN1657/8-P Netware Drivers for OS2.


 INSTALLATION PROCEDURE
 ======================

     Things You Need
     
Before you start with the installation process make sure you have
the following :

     a)  Hardware Driver Disk
     b)  Novell NetWare OS/2 WORKSTATION SERVICES REQUESTER diskette
         Novell NetWare OS/2 WORKSTATION OS/2 Utility - 1
         Novell NetWare OS/2 WORKSTATION OS/2 Utility - 2
         Novell NetWare OS/2 WORKSTATION OS/2 Utility - 3


 1. Install the OS/2 Requester, referring to Novell's documentation for
    NetWare Requester for OS/2 installation.


 2. Copy the \OS2\OS2MLID.SYS file from the support disk into the
    NETWARE subdirectory on your hard disk.

 3. Add or replace the OS2MLID.SYS command line in the CONFIG.SYS file.
    Make sure it precedes the IPX.SYS command line.  An example:

       DEVICE=C:\NETWARE\LSL.SYS          ; OS/2 Requester supported
       DEVICE=C:\NETWARE\DDAEMON.SYS      ; OS/2 Requester supported
       DEVICE=C:\NETWARE\OS2MLID.SYS      ; ACCTON EN1657/8-P supported
       DEVICE=C:\NETWARE\IPX.SYS          ; OS/2 Requester supported

 4. Reboot the computer and log onto your network.


 -----------------
 INSTALLATION NOTE
 -----------------

 You can bind several frame types to the IPX protocol to support various
 configurations -- in the Link Driver OS2MLID section of the NET.CFG
 file.

 SAMPLE:

    Link Driver OS2MLID

    frame Ethernet_802.3
    frame Ethernet_802.2
    frame Ethernet_II
    frame Ethernet_SNAP

    protocol IPX 00 Ethernet_802.3

------End of File-----
