

		    Accton Technology Corporation
		       EtherPocket EPP enabler
		     For EN2211 Ethernet Adapter

    Copyright (C) 1993, 1994 by Accton Technology Corporation.
    All rights reserved.


    EN-EPP is an enabler program which can enable Enhanced Parallel Port(EPP)
    or disable Enhanced Parallel Port. It can used as execution file or
    device driver.

 1. To run the EPP Enabler program as execution file

    Insert the ACCTON EtherPocket Hardware Driver Disk into drive A:,
    then type:

	       A:\> \EPP\EN-EPP     <Enter>

    If you want to disable the EPP mode, type


	       A:\> \EPP\EN-EPP U    <Enter>

	       [U]   This is an optional parameter that disable EPP mode


 2. To run the EPP Enabler program as device driver

    Add EN-EPP device driver before other network device driver
    in config.sys as follows:

      DEVICE=EN-EPP.EXE
      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\ACCNE\ETHEP.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS



--- The End ---

