D-Link Support Publishing       \NDIS\3OPEN.TXT                 November 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for 3Com 3+ Open Share

 Contents
 
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 
     A PCI compatible computer
     3COM 3+ Open Share
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used

 Compatibility List
 
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 

     Install 3Com 3+ Open with support for 3Com's 3C501 adapter cards.

     Copy the DLKPCI.DOS file into the C:\3OPEN\DOSWKSTA\LANMAN\DRIVERS 
      directory.

     Modify the corresponding device driver statement for the 3C501 card in 
      your CONFIG.SYS as follows:

        device = c:\3open\doswksta\lanman\drivers\DLKPCI.DOS

     Modify the PROTOCOL.INI file as follows:

        [ETHERLINK]
            :
        drivername = DLKPCI$
            :

     Reboot your system let the new configuration take effect.
