D-Link Support Publishing       \NDIS\LANMAN.TXT                November 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for MS LAN Manager

 Contents
 
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 
     A PCI compatible computer
     LAN Manager 2.x
     A PCI Family Series Adapter
     A knowledge of basic DOS\OS/2 commands and editing text files

 Minimum Skill Level
 
     A knowledge of basic DOS\OS/2 commands
     A knowledge of editing text files
     A knowledge of DOS\OS/2 basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used

 Compatibility List
 
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 

    DOS Installation
    

    The MS LAN Manager provides a SETUP.EXE program in the setup diskette
    for specifying a driver for the Ethernet adapter.

    To install a driver for DOS (see OS/2 below), follow these steps:

     If you are installing LAN Manager for the first time, answer "Yes"
      when prompted for the importation of additional network drivers.
      This prompt appears right after completion of the workstation
      installation.

     If LAN Manager is already installed in your hard disk, select 
      "Add New Config" from the Configuration menu.  Then, select 
      "Other Driver".

     Insert the driver diskette in Drive A and follow the instructions on
      the screen.  The SETUP program will copy the necessary NDIS driver
      programs from the driver diskette into your hard disk; that is, into
      the LAN Manager directory. (PATH=C:\LANMAN.DOS, if install specify)

     After completion of SETUP, your CONFIG.SYS file will be modified to
      reflect the NDIS driver programs.

     Reboot your system to affect the changes.

    OS/2 Installation
    

    The MS LAN Manager provides a SETUP.EXE program on the setup diskette
    for installing a driver for the Ethernet adapter.

     Run SETUP.EXE from the LAN Manager diskettes

     For a first time installation, answer "Yes" when prompted for the
      installation of additional network drivers. This prompt appears
      after completion of the workstation installation.

     If LAN Manager is already installed in your hard disk, select 
      "Add New Config" from the Configuration menu.

     Select "Other Drivers".

     Insert the driver diskette in Drive A and follow the instructions on 
      the screen.

     After completion of SETUP, your CONFIG.SYS file will be modified to
      reflect modfications.

     Reboot your system to affect the changes.

