D-Link Support Publishing       \NDIS\PATHWAY.TXT              November 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for WIN/TCP PathWay Access

 Contents
 
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 
     A PCI compatible computer
     WIN/TCP PathWay Access
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used

 Compatibility List
 
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 
     Install Win/TCP Pathway Access

     Copy the DLKPCI.DOS file into your C:\LANMAN directory.

     Change to the C:\LANMAN directory, and create a PROTOCOL.INI text file 
      with the following statements:

                [DLKPCI]
                drivername = DLKPCI$

     Add the following statements to your CONFIG.SYS file:

                device=c:\lanman\DLKPCI.DOS

     Add the following statements to your AUTOEXEC.BAT file:

                ndis
                winbind
                wintcp

     Reboot and Win/TCP Pathway should be active.
