D-Link Support Publishing       \NETWARE\NW4XX.TXT              November 1996

           D-Link PCI Family Ethernet Adapter Installation
                   for the NetWare Server 4.x Driver

 Contents
 
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started


 Introduction
 
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 
     A PCI compatible computer
     An ODI compatible network operating system
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used

 Compatibility List
 
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office
     Because this driver  follows  Novell  ODI  Driver Specification
      version 3.3, the NetWare version 4.10 NetWare server must be patched
      to work with this driver. The servers of NetWare version 4.11 and
      above do not need to be patched. The patching method is described
      as below:

       1. Copy LOADER.EXE and LSWAP.EXE to the NetWare 4.10 server
          directory.

       2. Execute LSWAP.EXE at MS-DOS prompt from server directory.

          Usage: LSWAP [loaderFilePath [serverFilePath]]
                 Default loaderFilePath = C:\NWSERVER\LOADER.EXE
                 Default serverFilePath = C:\NWSERVER\SERVER.EXE

 Getting Started
 

    Using the install menu for NetWare 4.11 (for other version see below)
    

     Boot up the Novell Server.

     After booting up, execute "LOAD INSTALL".  Type:

        : load install

     Select "Driver Option" and then press Enter.

     Select "Configure network drivers" and then press Enter.

     Select "Select a driver" and then press Enter.

     Press the Ins key to install an unlisted driver.

     Press F3 to specify a different PATH (C:\SRV4X) and then press Enter.
      <PATH> is the directory where DLKPCI.LAN resides.

     Select "DLKPCI.LAN" and then copy the DLKPCI.lan file.

     Set the adapter parameters, then select "Save parameters
      and load driver".

    Modifying an existing NetWare 4.x Server
    
     From any workstation, log in to the Novell server as a SUPERVISOR.

     Copy all provided files with NLM and LAN extensioins into your
      server's SYSTEM directory.   Type:

        >copy C:\<PATH>\*.LAN   F:\SYSTEM
        >copy C:\<PATH>\*.NLM   F:\SYSTEM        (OS default path)

        <PATH> is the directory where the supporting NLMs and
        DLKPCI.LAN reside.

     From the Novell Server side, execute "load install".  Type:

         :load install
           Select <NCF files options>
           Select <Edit AUTOEXEC.NCF>

     Modify the server's AUTOEXEC.NCF file as follows.

          :load DLKPCI.LAN SLOT=??
           (msm.nlm, ethertsm.nlm and nbi.nlm will also be loaded when loading
            DLKPCI.LAN)
          : bind ipx to DLKPCI NET=xxxx

     Shut down the server and then turn it ON again.

     The driver is now installed and running.
