D-Link Support Publishing      \NETWARE\NWLITE.TXT              November 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for the NetWare Lite Driver

 Contents
 
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 
     A PCI compatible computer
     An ODI compatible network operating system
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used

 Compatibility List
 
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 

     Follow the normal installation procedure as described by NetWare Lite.
      When prompted for a network driver, simply choose "NOVELL NE2000".

     After completion of the installation procedure, modify the following 
      lines in your STARTNET.BAT file from:

                  LSL
                  NE2000
                  IPXODI A
                  CLIENT

        to:

                  LSL
                  DLKPCI
                  IPXODI A
                  CLIENT

     Append the <PATH>\NET.CFG file to the NWLITE directory.  This directory 
      was created when you installed NetWare Lite.  
      <PATH> is the directory where NET.CFG resides.

     Run STARTNET to access the Novell network.
     
