D-Link Support Publishing       \NETWARE\OS2ODI.TXT             November 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for the NetWare OS/2 ODI Driver

 Contents
 
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 
     A PCI compatible computer
     An ODI compatible network operating system
     A PCI Family Series Adapter
     A knowledge of basic OS/2 commands and editing text files

 Minimum Skill Level
 
     A knowledge of basic OS/2 commands
     A knowledge of editing text files
     A knowledge of OS/2 basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used

 Compatibility List
 
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 

     Install the Requester on the workstation.  
      For information on the installation procedure, please refer to 
      Novell's "NetWare Requester for OS/2" manual.

     Copy DLKPCI.SYS into your C:\NETWARE directory.

     Modify your CONFIG.SYS file to include the following device driver
      statement:

         DEVICE=C:\NETWARE\DLKPCI.SYS

     Modify your NET.CFG file for special settings you need.  For information 
      on the various keywords, please refer to Novell's manual or the sample 
      NET.CFG file file included in the provided diskette.
