D-Link Support Publishing	 \NT35\README.TXT		November 1996

              D-Link DLKPCI Ethernet Adapter Installation
                         for Windows NT 3.5

 Contents
 
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 
     A PCI compatible computer
     Microsoft's Windows NT 3.5
     A PCI Family Series Adapter
     A knowledge of basic NT commands and editing text files

 Minimum Skill Level
 
     A knowledge of basic NT commands
     A knowledge of editing text files
     A knowledge of NT basic file structure
     A knowledge of the network driver configuration being used

 Compatibility List
 
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 

    The Windows NT CD/disks are need to complete this installation

     From the "Main" window, select "Control Panel"

     In the "Control Panel", select "Network" icon

     In the "Network Settings", select "Add Adapter..."

    Windows NT will display a list of all available drivers.

     Select "<Other>" for third-party adapters not included in the list.

    The program prompts for the directory containing the Ethernet drivers.

     Type the following(assume the driver is located at C:\NT35)

      C:\NT35

     Windows NT will attempt to locate the OEMSETUP.INF file in the specified
      path. If it exists there, Windows NT will then copy the appropriate
      drivers to the Windows NT system.

     The drivers are now properly installed.  The installation procedure
      will then proceed to the next steps. Please refer to your Windows NT
      installation guide for information on these steps.

     A window will appear allowing you to specify your network connection
      type and specify the network address.

      Choose the "AutoSense" option.
      The driver will auto-detect the media that is connecting to the
      adapter.

      Add nothing in the NetworkAddress field. The driver will use the
      default unique ethernet address that written in the adapter's
      PROM. If you want to change the ethernet address use the following
      format:
               xx-xx-xx-xx-xx-xx
            OR
               xxxxxxxxxxxx

     After the initial installation, the drivers will be permanently
      copied to the Windows NT system.	Subsequent network driver lists will
      already contain the drivers.




