D-Link Support Publishing       \PKTDRV\PCTCP.TXT               November 1996

        D-Link PCI Family Ethernet Adapter Packet Driver
                   Installation for FTP PC/TCP

 Contents
 
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 
     A PCI compatible computer
     FTP's PC-TCP Network Operating System
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable with this
      skill level

 Compatibility List
 
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 

    Two methods can be used:

    METHOD 1:
    
     If the DLKPCI.SYS program is used, the following statement must be
      included in your CONFIG.SYS file:

            DEVICE = DLKPCI.SYS [/option] <packet_int_no>

      <packet_int_no> is the software interrupt vector number used
                      by the packet driver program. This can be from
                      96 to 128.

      /d              Delay Initial - The driver program will not initialize
                      the network interface card until the packet driver
                      program is accessed by its upper layer program.

      /w              The /w parameter is used only in the Windows
                      environment.

      See \PKTDRV\README.TXT for additional parameters


    METHOD 2:
    
     If the DLKPCI.COM program is used, follow these steps:

     Execute DLKPCI.COM by typing:

            >DLKPCI [/option] <packet_int_no>

      <packet_int_no> is the software interrupt vector number used by the
                      packet driver program. This can be from 96 to 128.

      /d              Delay Initial - The driver program will not initialize
                      the network interface card until the packet driver
                      program is accessed by its upper layer program.

      /w              The /w parameter is for use only in the Windows
                      environment.

      See \PKTDRV\README.TXT for additional parameters

     Execute the ETHDRV.EXE and IDRIVE.EXE device driver programs.
      These programs are provided by FTP.

     FTP's PC/TCP and associated programs are ready to use.
