D-Link Support Publishing	 \WFW311\README.TXT		November 1996

               D-Link DLKPCI Ethernet Card Installation
                    for Windows for Workgroup 3.11

 Contents
 
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 
     A PCI compatible computer
     Microsoft's Windows for Workgroup 3.11
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used

 Compatibility List
 
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 

**********************************************************
*  README for Windows for Workgroups V3.11 Installation  *
**********************************************************

Installation Procedure:

     From the "Network" window, select "Network Setup" item.

     Click "Drivers.." button to install driver.

     In the "Network Drivers" dialog box, choose "Add Adapter" button.

     When LAN drivers is installed, Windows for Workgroups will present a list
      of all available drivers.  Since there will be no DLKPCI drivers initially,
      select Unlisted for 3rd party adapters not in the driver list.

     Windows for Workgroups will ask for the drive/path containing the DLKPCI.
      Type the following (assume the driver is located at C:\WFW311)

	    C:\WFW311

     Windows for Workgroups will attempt to locate an OEMSETUP.INF file in the
      specified path. If you have entered the path name correctly, Windows
      for Workgroups should copy the appropriate drivers to the Windows for
      Workgroups system.

     At this point, the driver would have been properly copied and the
      installation would proceed to the next step.  Please refer to your
      Windows for Workgroups installation guide for correct procedures.
                           
     The driver allows you to specify your network connection type and
      the network address.

      In the "Netwrok Drivers" dialog box, choose Setup button:

      For "Connection Type", choose the AutoSense option.
      The driver will auto-detect the media that is connecting to the
      adapter.

      Add nothing in the NetworkAddress field. The driver will use the
      default unique ethernet address that written in the adapter's
      PROM. If you want to change the ethernet address use the following
      format:
               xx-xx-xx-xx-xx-xx
            OR
               xxxxxxxxxxxx

     After the initial installation, the drivers will be permanently
      copied to the Windows for Wrokgroups system.
      Subsequent network driver lists will already contain this drivers.
