
        D-Link PCI Fast Ethernet Adapter Installation
                   for Banyan Vines


 Getting Started
 
    There are two methods of copying files from the Banyan VINES
    workstation to the bootable diskette or subdirectory on the hard
    disk.

    Method 1
    
     Execute the 'INSTALL' command included in the diskette labeled
      "VINES MASTER DISK".

     Follow the given instructions for copying files.

    Method 2
    
     Execute the 'BAN' command.

     Login to VINES system.

     Execute the 'PCCOPY' command.

     Select the 'NDIS Ethernet' option and follow the instructions for
      copying files.

     Prepared bootable diskette in Drive B. Then, copy the appropriate
      NDIS driver file DLKPCI.DOS to Drive B.

     Create a CONFIG.SYS file with the following statements:

        DEVICE=PROTMAN.DOS /I:A:\
        DEVICE=DLKPCI.DOS

      NOTE:  A:\ is the path where Banyan VINES workstation files reside.

     Create a DLKPCI.NIF file containing the following statements:



        Model = D-Link PCI Fast Ethernet Adapter
        Path = A:\
        DeviceDriver = DLKPCI.DOS
        DeviceName = DLKPCI$
        Type = NDIS

      NOTE:  A:\ is the path where Banyan VINES workstation files reside.

     Create a PROTOCOL.INI file with the following lines:

        [PROTOCOL MANAGER]
        drivername = PROTMAN$

        [VINES_XIF]
        drivername = NDISBAN$
        bindings = "DLKPCI"

        [DLKPCI]
        drivername = DLKPCI$

     Execute the 'PCCONFIG' command.

      A "CONFIGURING A PC FOR THE NETWORK" message appears on the
      screen. The program then provides some options you can select.

     Select "1 - Network Card Settings".

      Another screen appears for selecting some options.

     Select "NDIS Ethernet".

     Select the appropriate configuration of the adapter.

     After configuring the adapter, you return to the main screen.

      Select "2 - Login Environment Settings".

     From the next screen, select "NDIS Ethernet".

      The 'PCCONFIG.DB' file will then be created.

     Reboot your computer.

     Login to VINES by executing the 'BAN' command.
