
           D-Link PCI Fast Ethernet Adapter Installation
                      for Windows NT V4.0


 Getting Started
 

     Start your Windows NT 4.0 PC normally and inserting the network
      adapter into your computer.

     Open "My Computer" -> "Control Panel" -> "Networks" icons.

     Select "Add adapter" -> "Have disk" items.
      Type the following (assume the driver is located at A:\)

            A:\

      Select the "D-Link DFE-500TX PCI Fast Ethernet Adapter...".

     Windows NT 4.0 will copy the driver files from the driver disk.
      It also will pop up the configuration window, you can assign the
      "Connection Type" and "Network Address" here.

     After finishing file copy, Windows NT 4.0 will ask you to reboot the PC.
      Select YES.

     Restart the computer.


    Driver keywords:
    

     Open "My Computer" -> "Control Pannel" -> "Network" ->
      Double click "D-Link DFE-500TX PCI Fast Ethernet Adapter..."

      Connection Type      Specify the connection type for the adapter.
                           Default: AutoSense

      Network Address      You can set the Ethernet address for your adapter.
                           It is not recommended to use this keyword. Please
                           use default value if possible.
                           As you know two or more adapter in the same network
                           with same Ethernet address will cause a little
                           poblem.

                           When using this keyword you need to input exactly
                           6 bytes of Ethernet address using one of the
                           following format:

                             xx-xx-xx-xx-xx-xx
                           OR
                             xxxxxxxxxxxx

                           Default: read address from adapter ROM.
