
             D-Link DFE-540TX Fast Ethernet PCI Adapter Installation
                          for Personal Netware

 Contents
 --------
        -Introduction
        -Getting Started


 Introduction
 ------------
        This ODI driver supports the Port, Node Address, Protocol and
        Frame options for creating your own NET.CFG file. For more
        information on these keywords, please refer to Novell's
        "NetWare ODI shell for DOS - NET.CFG options". This installation
        assumes that the drivers are working properly.


 Getting Started
 ---------------
    The NOVELL Personal NetWare installation diskettes are needed to
    complete this install.

        - Follow the normal installation procedure as described by
          Personal Netware.
        - It will prompt the user for a network driver choose "Other
          Network support driver".
        - It will request a path for the drivers. Respond with the
          path of the ODI DOS driver and NET.CFG sample installed
          with this readme.
        - After completion of the installation procedure, modify the
          following lines in your STARTNET.BAT file from:

                  LSL
                  NE2000
                  IPXODI
                  CLIENT
        to:
                  LSL
                  DLKTX
                  IPXODI
                  CLIENT

        - Append the <PATH>\NET.CFG file to the NWCLIENT directory.
          This directory was created when you installed Personal
          NetWare .  <PATH> is the directory where NET.CFG resides.

        - Run STARTNET to access the Novell network.

