
             D-Link DFE-540TX Fast Ethernet PCI Adapter Packet Drivers
                        Installation Overview


 User's Guide
 ------------

    File            Description
    ------------    -----------------------------------------------------
    PCNFS.TXT       Sun PC-NFS installation document
    PCTCP.TXT       FTP PC/TCP installation document
    PDIPX.TXT       IPX SHELL installation document
    NCSA.TXT        NCSA installation document
    WINSOCK.TXT     Winsock installation document

    DEVICE = DLKTX.SYS [/option] <packet_int_no>
    DLKTX.COM [/option] <packet_int_no>

    Packet Driver Parameters:

    [/i]    The "/i" option forces driver to report itself as IEEE 802.3
            instead of Ethernet II.

    [/d]    The "/d" option does not start LAN card until this driver is
            called by the higher layer programs first.

    [/n]    Your  NOVELL server uses NOVELL ISO-like packets. Your NOVELL
            workstation uses  NOVELL 8137 packets. You can use this option
            to convert NOVELL 8137 packets into  NOVELL ISO-like packets.

    [/w]    Steve Wallace added a hack to let the packet drivers run under
            Windows. This is not to be construed with the proper solution,
            which is to write a TCP/IP package for Windows.
            This hack is enabled only when you use the '/w' switch.

    [/p]    The "/p" option is used to disable promiscuous mode.

    [/h]    The "/h" option is used to select the 100Mbps line speed.

    [/l]    The "/l" option is used to select the 10Mbps line speed.

    [/f]    The "/f" option is used to select the full deuplex mode.
            (note: The option must be used with /h or /l option)

    [/u]    This option unloads the Packet Driver.

    <packet_int_no> This specifies the software interrupt (IRQ) where
                    you'll load the packet driver. It must be in the
                    range 0x60 to 0x80.
