
          D-Link DFE-540TX Fast Ethernet PCI Adapter Installation
                           for Windows 98

 Getting Started
 ---------------
    The Windows 98 installation disks or CD are needed to complete this
    install.

    Windows 98 Installation Procedure
    ---------------------------------

     1. Plug PCI Ethernet adapter into the system.

     2. Start your PC normally.  Upon power up, the system will
        indicate to you that new "PCI Ethernet Controller" hardware has
        been found. Press "Next" to be continue.

     3. Insert the driver diskette into floppy disk.

     4. Select "Search for the best driver for your device [Recommanded]".

     5. Check "Floppy disk drivers." and press "Next".

     6. The system detect the necessary driver will being
        install for the new hardware.

     7. After finishing file copying, the Windows system will ask
        you to restart the system.  Select YES to reboot.

     8. During system boot up, the operating system will automatically
        detect the PCI Fast Ethernet adapter and install the driver for
        the adapter.
   

    Windows 98 Installation Procedure for NDIS5 driver
    --------------------------------------------------

     1. Plug PCI Ethernet adapter into the system.

     2. Start your PC normally.  Upon power up, the system will
        indicate to you that new "PCI Ethernet Controller" hardware has
        been found. Press "Next" to be continue.

     3. Insert the driver diskette into floppy disk.

     4. Select "Search for the best driver for your device [Recommanded]".

     5. Check "Specify a location" and specify the path (A:\WIN98),
        then press "Next".

     6. The system detect the necessary driver will being
        install for the new hardware.

     7. After finishing file copying, the Windows system will ask
        you to restart the system.  Select YES to reboot.

     8. During system boot up, the operating system will automatically
        detect the PCI Fast Ethernet adapter and install the driver for
        the adapter.


 Trouble Shooting
 ----------------

     - Everything is OK in Device Manager, but network adapter still
       does't function properly. Please make sure that your Computer
       name is different from others in the same network.  You can change
       your Computer name in

       "My Computer" -> "Control Panel" -> "Network" -> "Identification"
       icons

     - Everything appears to be OK but network adapter still doesn't
       function properly. Please make sure that the adapter is properly
       connected to a network device (ex: HUB) and the "connection type"
       for this adapter is set to "AutoSense" or the correct media type.
       You can check it in

       "My Computer" -> "Control Panel" -> "Network" -> "Properties"
       icons. Select "Advanced" item.


 Driver keywords
 ---------------
     - Open "My Computer" -> "Control Pannel" -> "Network" ->
       Double click "D-Link DFE-540TX Fast..", Select "Advanced" item.

       Connection Type      Specify the connection type for the adapter.

                            AutoSense:Default
                            100Base-Tx Full Duplex
                            100Base-Tx
                            10Base-T(Twisted Pair)
                            10Base-T Full Duplex


       Network Address      You can set the Ethernet address for your
                            adapter. It is not recommended to use this
                            keyword. As you know two or more adapter in
                            the same network with same Ethernet address
                            will cause a little problem.

                            When using this keyword you need to input
                            exactly 6 bytes of Ethernet address using
                            one of the following format:

                              xx-xx-xx-xx-xx-xx
                            OR
                              xxxxxxxxxxxx

                            Default: read address from adapter ROM.
