   LAN Server 2.0 or 3.0

   Introduction:
   -------------
   This document describes the procedure to install NDIS driver on DOS LAN
   Requester for Plug & Play ethernet adapter.


   Location of Driver:  \NDIS2\DOS\PnPCard.DOS (for DOS LAN Services)


   Installing driver procedure on DOS LAN Requester :
   --------------------------------------------------

      1. Insert  the IBM  LAN Support Program (LSP) Version 1.30 (or 1.31)
         Diskette into your floppy drive A: .

      2. Type A:\dxmaid  and press <Enter> .

      3. The  screen will display the  IBM logo. Press <Enter> twice until
         the "Environment Information" appears on screen.

      4. Responds to the screen  prompts , specifying the following values
         for each field,use the <Space Bar> to toggle between choices:

                Configuration for this computer?          Yes
                Use existing configuration information?   Yes
                Do you have adapter option diskettes?     Yes
                Are you configuring for two adapters?     No
                Do you need 802.2 interface support?      Yes

                Source for LSP                           A:\
                Target for new configuration             C:\lsp

         Make  sure  that the values given above are  correct , then press
         <Enter> to store your choices.

      5. Insert the PnPCard driver diskette in floppy A,and specify your path
         A:\NDIS2\DOS, then press <Enter>.

      6. Follow  screen  instructions  to  complete  the  process.  Simply
         pressing  <Enter> for each screen display will select the default
         options.  Press <Enter> until you reach the display prompting you
         to insert the LSP diskette.

      7. Insert the LSP diskette as prompted. Press <Enter> to acknowledge
         completion of the action.

      8.  A screen  showing  the  current  configuration  detected will be
          displayed. It should show the PnPCard adapter and  the  protocols
          already selected. ( i.e., "IBM IEEE 802.2" ).

      9.  Press <F4>. to save the new configuration.This completes the LSP
          installation.

      10. Save the configuration and reboot your computer.

      11. Insert the DOS LAN Requester Install Diskette 1 into your floppy
          drive.

      12. Type A:\INSTALL    <Enter>

      13. The  IBM logo will  again appear on the screen. Press <Enter> to
          move on to the next screen.

      14. Follow  screen  instructions ,  pressing  <Enter>  to move  from
          screen-to-screen until you are prompted to indicate the pathname
          of the DOS LAN Requester directory (C:\DOSLAN ).

      15. Specify the pathname (C:\DOSLAN is the default) for the  DOS LAN
          Requester directory . Then press <Enter> to continue.

      16. The program will ask you for the services that you require.

      17. Highlight the appropriate option. Select either "Send messages"
          or "Send, View, Edit, and Log message" option. (Normally, second
          option "Send, View, Edit and Log message" is selected).

      18. Specify the PC's ID and domain ID.

      19. Follow screen prompts to complete the installation.


   Note :
   -----
      DOS version must be bellow DOS 5.0 when installing DOS LAN requester
      into your DOS system.

