
        D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
                   for SCO OpenServer V5.0 MDI Driver


 Getting Started
 ---------------

0. Login as root user. (On maintenance mode)

1. Using "custom" to install the driver

    1.1 Prepare an image file

        Copy d5B.IMG onto SCO OpenServer and rename it to VOL.000.000

            # mkdir /usr/test
            # doscp a:/<PATH>/d5B.IMG /usr/test/VOL.000.000

              * <PATH> is the driver directory


    1.2 Execute "custom"

        /* A menu selection screen will be popped up */
        Using [->] key to move cursor to "Software" menu item then
        press [] key to get into pull down menu then move to
        "Install New..." then press [ENTER] key


           Begin Installation on scoopen ͻ
                                                             
            What host (machine) do you want to install from? 
                                                             
            Ŀ 
            <*> From scoopen                               
            < > From another host                          
             
                                                             
          ĺ
          [ Continue ]        [ Cancel ]         [ Help]     
          ͼ

        Select From scoopen and use [TAB] key to move cursor to
        [ Continue ] then press [ENTER] key and press [] key to get
        into pull down menu

           Select Media ͻ
                                                                        
            Insert media, and select media device.                      
                                                                        
                         Ŀ 
            Media Device:|Floppy Disk Driver 0_____________________|v 
                         ͻ 
                          Ŀ                    
                          *Floppy Disk Driver 0                     
                           Media Images                             
          ĺٺĺ
          [ Continue ]    ͼ          [  Help  ]
          ͼ


        -> Select "Media Images" and use [TAB] key to move cursor to
           [ Continue ] then press [ENTER] key then press [ENTER] key
           again

  Enter Image Directory ͻ
                                                                         
  Enter the full path to the directory containing media images.          
                                                                         
  Image Directory: |/usr/test__________________________________________| 
                                                                         
  Note: media images must follow the naming convention VOL.000.000, etc. 
                                                                         
                                                                         
                                                                         
 ĺ
 [   OK   ]                     [ Cancel ]                     [  Help  ]
 ͼ

            -> Input the path name where VOL.000.000 is located as above
               path name is /usr/test


  Enter Image Directory ͻ
                                                                           
  Installing: D-Link DFE-530TX PCI Fast Ethernet Device Driver (version 1.0
                                                                           
  Do you want a FULL or PARTIAL installation?                              
                                                                           
 ĺ
 [  Full   ]           [ Partial ]         [ Cancel  ]          [  Help   ]
 ͼ

        Using [TAB] key to move cursor to [ Full ] then press [ENTER] key

        After the installation progress the following message is displayed


                        Question ͻ
                            Installation complete     
                       ĺ
                                   [ OK ]             
                       ͼ

        Press [Enter] key then you will find out that

                D-Link DFE-530TX PCI Fast Ethernet Device Driver (ver 1.0.2)

        is added to the package list

        Using [<-] key to move cursor back to "Host" menu item then
        press [] key to get into pull down menu then move to "Exit"
        then press [ENTER] key

        Now that the driver is installed in the system successfully.


2. Using "netconfig" to configure the driver

   /* A menu selection screen will be popped up */
   At "Hardware" menu item press [] key to get into pull down menu then
   move to "Add new LAN adapter" then press [ENTER] key

   If you got a PCI NIC inserted on your machine, it will list as
   following:


 Add new LAN adapter ͻ
The following adapters have been found:                                     
Ŀ
*   D-Link DFE-530TX PCI Fast Ethernet Adapter - PCI Bus 0, PCI Dev 11, PC
                                                                          
                                                                          
                                                                          
                                                                          
ٺ
[ Configure hardware not listed above... ]                                  
ĺ
[ Continue ]                       [  Cancel  ]                   [  Help  ]
ͼ

       If the "D-Link DFE-530TX PCI Fast Ethernet Adapter..." has been
       displayed press [ENTER] directly, otherwise using [TAB] key to
       move to "Configure hardware not listed above..." then press
       [ENTER] key


 Add new LAN adapter ͻ
Select network adapter to be added:                                         
Ŀ
*   3Com EtherLink 16/16TP Adapter                                        ^
                   .                                                      *
                   .                                                      *
                   .                                                      *
                   .                                                      *
                   .                                                      *
                   .                                                      *
                   .                                                      *
    D-Link DFE-530TX PCI Fast Ethernet Adapter                            *
                   .                                                      
                   .                                                      
                   .                                                      
                   .                                                      
                   .                                                      
                   .                                                      v
ٺ
ĺ
[ Continue ]                       [  Cancel  ]                   [  Help  ]
ͼ

   Using [] key to move to "D-Link DFE-530TX PCI Fast Ethernet Adapter"
   then press [ENTER] key.

   Network Driver Configuration ͻ
                                                                        
  Enter the configuration of D-Link DFE-530TX PCI Fast Ethernet Adapter:
                                                                        
                  Ŀ [ Advanced   ]         
       PCI Bus#:  | 0_______________________|v   Options...           
                                          
                  Ŀ                        
    PCI Device#:  | 0_______________________|v                        
                  ͻ                        
                  ںĿĿ                        
  PCI Function#:    9   ^________________|v                        
                    10                          
                     11                                             
     * - indicates   12  *ith other hardware                         
  ĺ* 13  *ĺ
  [   OK   ]         14  v    [ Cancel ]                   [  Help  ]
  ͺٺͼ
                    ͼ

   The above screen let you fill the information of where your PCI adapter
   is located by specifying PCI Bus#, PCI Device# and PCI Function#.

   Note1: If you can not make sure the PCI parameters or your PCI Device#
          can not be found in the list, just leave them as default values,
          continue the following installation, after the driver is
          installed and system is re-linked, reboot the system then driver
          will search PCI Ethernet card automatically.

   "Advanced Options" let you specify what media type is connectted.
   If you select it the following screen will be popped up

  Advanced Network Driver Configuration ͻ
                                                                        
 Enter the configuration of D-Link DFE-530TX PCI Fast Ehternet Adapter: 
                                                                        
              Ŀ                               
 Media Type:  | Auto_________________|v                               
              ͻ                               
                Ŀ                                     
    * - indicat * Auto         her hardware                         
 ĺ   TP           ĺ
 [   OK   ]       TP_FD        el ]                       [  Help  ]
 ͺ   TX100        ͼ
                   TX100_FD     
                 ٺ
                ͼ

   Select the connective media then press [ENTER] key to go back to
   "Network Driver Configuration" screen.

   Using [TAB] key to move cursor to "OK" then press [ENTER] key.

    Information ͻ
   ---  Please verify adapter is set to the configuration just entered
   ĺ
                                 [ OK ]                               
   ͼ

   Press [ENTER] key.


 Add Protocol ͻ
Select one networking product to be added to                                
D-Link DFE-530TX PCI Fast Ethernet Adapter:                                 
Ŀ
 HW D-Link DFE-530TX PCI Fast Ethernet Adapter                            
*   - SCO IPX/SPX                                                         
    - SCO TCP/IP                                                          
                                                                          
                                                                          
ٺ
ĺ
[  Add   ]                        [ Cancel ]                      [  Help  ]
ͼ

   Using [] key to move cursor to "SCO TCP/IP" then press [ENTER] key.

    SCO TCP/IP Configuration ͻ
                                                            
                                                            
                                                            
                                                            
     Local Host Name:  |scoopen_____________| [ Advanced   ]
          IP Address:  |192.9.200.1_________|   Options...  
             Netmask:  |255.255.255.0_______|               
   Broadcast Address:  |192.9.200.255_______|               
         Domain Name:  |scoopen.com_________|               
     TCP connections:  |256_________________|               
         Pseudo ttys:  |32__________________|               
                                                            
                                                            
   ĺ
                                                            
    [   OK   ]             [ Cancel ]            [  Help   ]
                                                            
   ͼ

   Input the required information then use [TAB] key to move cursor to
   "OK" then press [ENTER] key.

 Message ͻ
 The following products were successfully configured into the system   
 SCO TCP/IP                                                            
 D-Link DFE-530TX PCI Fast Ethernet Adapter - PCI Bus#0,PCI Device#13,P
                                                                       
ĺ
[ OK ]                                                       [ Help ]  
ͼ

   Press [ENTER] key


   At "Hardware" menu item press [] key to get into pull down menu then
   move to "Exit" then press [ENTER] key

   Question ͻ
       The Unix Kernel must be re-linked before the changes
  ???  made here will have an effect.                      
       Do you want to re-link the kernel now?              
  ĺ
   [  YES   ]                                      [ NO  ] 
  ͼ

   Press [ENTER] key

   Do you want this kernel to boot by default (y/n)    y

   Do you want the kernel environment rebuilt (y/n)    y

3. Reboot unix

   # shutdown -y -g0

***************************************************
* Another way to specify driver's PCI parameters  *
***************************************************

. Another way to modify PCI parameters is at booting
   time, shown as below:

   1. Specify PCI Bus#, PCI Device# and PCI Function#

       Boot
       : unix net.mdi=d5B(0) net.param=(pcb:0,pcd:14,pcf:0)

   2. Auto-search PCI adapter card

       Boot
       : unix net.mdi=d5B(0)


Note2: The IRQ number must match with the value set in ROM-BIOS before you
       specify this value, please check it.
       The IRQ for PCI bus can be accessed by pressing [DEL] key when
       system is power on and choose the proper select item to set IRQ
       for PCI bus.

       Example: ROM PCI/ISA BIOS (2A4X5C31)
                   PCI/GREEN FUNCTION SETUP
                  AWARD SOFTWARE, INC.

             Press [DEL] key  -->  PCI/GREEN FUNCTION SETUP

                                   Slot 3 Using INT# : A-PIRQ1
                                           .
                                           .
                                           .
                                   PIRQ1# Connect IRQ: 5 By Single
                                                       ~


