*****************************************************************************
*                                                                           *
*                     DAVICOM PCI Fast Ethernet Adapter                     *
*                                                                           *
*                         NDIS5 Driver for WIN98                            *
*                                                                           *
*                           v0.13   Mar. 1999                               *
*                                                                           *
*****************************************************************************

Introduction:
=============

  This document shows you how to setup the driver and how to use the enhanced
  functions by setting the custom keywords.


Contents of the Subdirectory:
=============================

    DM9PCI5.SYS         The NDIS4 driver for WIN98.
    NET5DM.INF         	The installation information file.
    README.TXT          This file.


Installation:
=============

  Before starting with the installation process, make sure that the adapter
  is properly installed and configured. You can use the diagnostic program
  (A:\DIAG9102.EXE) in DOS mode to make sure your connection with the network is
  correct.

    1. Turn the power of your PC on to boot from WIN98. WIN98 may
       auto-detect your new adapter installed, and the "New Hardware Found"
       dialogue box will appear. Select "Driver from disk provided by hardware
       manufacturer" to install driver from the diskette that come with your
       lan adapter.

       Note: If your new adapter is not detected by WIN98, you can open
       "My Computer" -> "Control Panel" -> "Networks" after WIN98 comes up,
       and select "Add adapter" -> "Have disk" to install driver from the
       diskette that come with your lan adapter.

    2. Insert the driver diskette into your floppy drive, and specify the
       path of the driver in the diskette(i.e. A:\WIN98) to copy the driver
       files to your system.

    3. Select "DAVICOM PCI Fast Ethernet Adapter (DM9102)", and start to copy the driver
       files to your system.

    4. When the driver installation is completed, restart WIN98.

    5. Note: Select Item
	DAVICOM PCI Fast Ethernet Adapter (DM9102) - Don't check Sub System/Vendor ID.
	DAVICOM 9102 PCI Fast Ethernet Adapter - Must have correct Sub System/Vendor ID.

	

