   LAN Server 2.0/3.0

   Introduction:
   -------------
   This document describes the procedure to install NDIS driver on DOS
   LAN Requester and OS/2 LAN server 2.0(or 3.0) for PCI Ethernet
   adapter.


   Location of Driver:  \NDIS\DOS\LAN_S23\PCIND.DOS  (for DOS LAN Requester)
                        \NDIS\OS2\PCIND.OS2  (for OS/2 LAN Server)


   Installing driver procedure on DOS LAN Requester :
   --------------------------------------------------

      1. Insert the IBM LAN Support Program (LSP) Version 1.36 
         Diskette into your floppy drive A: .

      2. Type A:\dxmaid  and press <Enter> .

      3. The screen will display the IBM logo. Press <Enter> twice until
         the "Environment Information" appears on screen.

      4. Responds to the screen prompts, specifying the following values
         for each field,use the <Space Bar> to toggle between choices.
         Make  sure  that  the values given above are correct, then press
         <Enter> to store your choices.

      5. In process driver diskette menu, insert the ETHPCI driver
         diskette in floppy A,and specify your pathname
         A:\NDIS\DOS\LAN_S23,then press ENTER.

      6. Follow  screen  instructions  to  complete  the  process. Simply
         pressing <Enter> for each screen display will select the default
         options. Press <Enter> until you reach the display prompting you
         to insert the LSP diskette.

      7. Insert the LSP diskette as prompted. Press <Enter> to acknowledge
         completion of the action.

      8. A screen  showing  the  current  configuration  detected will be
         displayed. It should show the ETHPCI adapter and the protocols
          already selected (i.e.,"IBM DOS NETBIOS" and "IBM DOS IEEE802.2
          PROTOCOL for NDIS").

      9.  Press <F4>. to save the new configuration. This completes the LSP
          installation.

      10. Save the configuration and reboot your computer.


   Installing driver procedure on OS/2 LAN Server 2.0/3.0 :
   ------------------------------------------------------
      Before you start with the installation  process,  make sure that
      OS/2 LAN Server  is properly installed.  Similarly, your adapter
      should also be properly installed in your server.

      1. Copy PCIND.OS2 and ETHPCI.NIF files from your Driver diskette
         (\NDIS\OS2) to C:\IBMCOM\MACS.

      2. Click the OS/2 LAN Service icon.

      3. Select "Installation  and  configuration". The IBM logo should
         appear onscreen.

      4. Click <OK>.

      5. Select <Advance> and press <Enter>.

      6. Select "Install or Configuration this Workstation."

      7. Select server type, adding a server or domain controller.  The
         "install or remove" selections should appear.

      8. Select "Configure a component."

      10. Click the "Configure" button.

      11. Select "Configure workstation."

      12. Select "PCI ethernet adapter" when prompted to identify
          you Network Adapter. Then click the <Add> button.

      13. Select IBM NETBIOS from the list and click the <Add> button.

      14. Select <OK> to confirm all selections.

      15. Follow screen instructions to complete the process, selecting
          <OK> to accept default selections.

      16. Continue pressing <OK> until your screen prompts you to backup
          old  CONFIG.SYS and  AUTOEXEC.BAT and create a new  CONFIG.SYS
          and AUTOEXEC.BAT. Also select <OK> to confirm this.

      17. Installation is complete now. Reset your PC by turning it off
          and on.

