
                 32 Bit IO Mode PCI Ethernet Adapter
               NDIS/3 DRIVER FOR WINDOWS INSTALLATION


>*******************************************************************<
>                                                                   <
> The driver contained in this directory applies for the following: <
>                                                                   <
>                32 bit IO Mode PCI Ethernet adapter                <
>                                                                   <
> They are used with Microsoft Windows NT Release 3.5 or above on   <
> the X86 platform.                                                 <
> The drivers named E32ND3 conform to the Network Driver            <
> Interface Specification (NDIS) 3.0.                               <
>                                                                   <
>*******************************************************************<



>>**  File list of the directory \WINNT  <<**

E32ND3.SYS      NDIS/3 driver for the adapter on Windows NT

WINNT.TXT       this documentation file



>>**  Driver Installation on Microsoft Windows NT 3.51 <<**

   1)  Double click the Control Panel icon in Windows NT.

   2)  Click on the Network icon.

   3)  Click on the "Add Adapter" button.

   4)  Select "<other> Requires disk from manufacturer" from the scroll
       list then press [Enter].

   5)  Insert driver diskette in drive (A: or B:); type in the drive and
       pathname (e.g., A:\ or B:\ ) then click OK.

   6)  In the "OEM Option dialog" box, the following will be displayed:

                32 bit IO Mode PCI Bus Ethernet Adapter

   7)  Driver installation is completed.  The newly installed adapter card
       type and driver will now become part of the network system software.

               "[0x]32 bit IO Mode Ethernet PCI Adapter"

       will be listed in the "Installed Adapter Cards" menu.

   8)  Finally, complete the network installation process, bind the
       adapter to transport drivers by choosing "Bindings" button under
       Network Setting dialog box.

   9)  Reboot your system for the changes to take effect.


>>**  Driver Installation on Microsoft Windows NT 4.0 <<**

   1) Open "Control Panel" -> "Networks", and choose the "Adapters".
      In "Adapters" click on "Add...", and then click "Have Disk...".

   2) Insert the driver diskette into your floppy drive, and specify the
      path of the driver in the diskette(i.e. A:\) if necessary.

   3) Select "32 bit IO Mode PCI Bus Ethernet Adapter", and start to copy the
      driver files to your system.

   4)  Driver installation is completed.  The newly installed adapter card
       type and driver will now become part of the network system software.

               "[0x]32 bit IO Mode Ethernet PCI Adapter"

       will be listed in the "Network Adapters" menu, then click on "Close".

   5) When the driver installation is completed, restart your PC.



**>  Trademarks  <**
Microsoft Windows NT is a trademark of Microsoft Corporation.

All trademarks or brand names mentioned are trademarks or registered
trademarks of their respective companies.



|<<<  THE END  >>>|
