Ŀ
	       32-bit PCI (Fast) Ethernet Adapter		
	  NDIS/2 DRIVER FOR LAN MANAGER INSTALLATION		


The drivers named ETHPCI contained in the directories MSLANMAN.DOS
and MSLANMAN.OS2 conform to the Network Driver Interface
Specification (NDIS) 2.0 defined by Microsoft/3Com.


NDIS Driver Installation on LAN Manager v2.0
============================================

1. Type "Setup" in the LAN Manager directory and press Enter.

2. Choose "Import Network Drivers..." in the "Action" field. Press
   <Enter> to continue.

3. Insert your Driver Diskette into either drive A: or B:. Then
   press <Enter> to see the list of Imported Network Drivers appear
   onscreen.

4. Press the <Space> Bar to select the appropriate Network Adapter
   (i.e.  "32-bit PCI Bus (Fast) Ethernet Adapter"),
   then press <Enter> to confirm your choice.

5. Follow screen instructions to complete the process, until the Network
   Driver appears onscreen.

6. Identify your Network Adapter if asked. For example, select

	"32-bit PCI Bus (Fast) Ethernet Adapter"

   to confirm any 32-bit PCI LAN Adapter.

7. Select the <Add driver> and the <Add protocol> options.
   Then select <OK> to confirm your choices. The Workstation's
   primary parameters should appear onscreen.

8. Respond to all prompts issued onscreen to complete the  process.
   Select <OK> to confirm a choice.

9. Save all selections. Choose "Save" from the "Action Menu"

10. Press <F3> to exit.



NDIS Driver Installation on LAN Manager v2.1
============================================

1. Type "lmsetup" in the LAN Manager directory and press <Enter>.
   The Microsoft LAN Manager Setup screen should appear.

2. Choose "Network Drivers..." in the "Configuration" field. Press
   <Enter> to confirm your choice.

3. Choose <Add New Configs> and press <Enter> to display a list of
   Network Adapter Drivers.

4. Choose <Other Driver> and press <Enter>.

5. Insert the Driver Diskette into drive A: or B: of your PC.
   Indicate the drive location of the diskette and select <OK>
   to proceed.

6. Select the appropriate Network Adapter Driver from the list.
   For example, select

	"32-bit PCI Bus (Fast) Ethernet Adapter"

   Select <OK> to confirm your choice.

7. Select an appropriate protocol. Use the <Space> bar to highlight
   your choice.

8. Select <OK> to confirm your choice.	A Configuration Complete message
   should appear onscreen.

9. Save the configuration. Select <Save>.

10. Press <F3> to exit.



NDIS Driver Installation on LAN Manager v2.2
============================================

1. Type setup in the LAN Manager directory and press <Enter>. The
   Microsoft LAN Manager Setup screen should appear.

2. Choose "Network Drivers" from the "Configuration" field. Press <Enter>
   to confirm your choice.

3. Choose <Add New Config> and press <Enter> to display a list of Network
   Adapter Drivers.

4. Choose <Other Driver> and press <Enter>.

5. Insert the Driver Diskette into drive A: or B: of your PC. Indicate the
   drive location of the diskette and select <OK> to proceed.

6. Select the appropriate Network Adapter Driver from the list.
   For example, select

	"32-bit PCI Bus (Fast) Ethernet Adapter"

   Select <OK> to confirm your choice.

7. Select an appropriate protocol. Use the <Space bar> to highlight your
   choice. If you have chosen the TCP/IP protocol, you will be prompted to
   key-in the IP address, the subnet mask, and the default gateway (router).
   By the default, the workstation number of NetBios session is set to 6.
   Please consult Microsoft LAN Manager Installation Manual for more details,
   or check the online help.

8. Select <OK> to confirm your choice.	A Configuration Complete messages
   should appear onscreen.

9. Save the configuration. Select <Save>.

10. Press <F3> to exit.



If you are installing the LAN Manager for the first time, you will be prompted
to key-in the default user name and domain of the workstation, as well as to
answer the questions concerning Windows environment and memory management. Just
follow the instructions on the screen.


Sample Configuration Files
==========================

// LAN Manager 2.0

// CONFIG.SYS File

	LASTDRIVE=Z
	BUFFERS = 35
	FILES = 35
	SHELL=C:\DOS62\COMMAND.COM C:\DOS62 /p /E:1024
	DEVICE=C:\HIMEM.SYS
	DEVICE=C:\DOS62\SETVER.EXE
	DOS=HIGH,UMB
	DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
	DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ETH_32\ETHPCI.DOS
	DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS

// PROTOCOL.INI File

	[PROTOCOL MANAGER]
	 DRIVERNAME = PROTMAN$
	[NETBEUI_XIF]
	 Drivername = netbeui$
	 BINDINGS = "ETHPCI_NIF"
	[ETHPCI_NIF]
	;------------------------------------------------------------------------
	; Sample Protocol.ini file for 32-bit PCI Bus (Fast) Ethernet Adapter
	; NDIS/2 driver
	;------------------------------------------------------------------------
	  DriverName = ETHPCI$
	; Slot = 16	      ;; {1-26}
	  SIA_Mode = AUTODETECT
	;; {SIA_Mode = TP, BNC, TP_FULL_DUPLEX, AUTODETECT}
	; DATA_RATE = MB10   ;; {MB10, MB100}

	; End of this sample file

// AUTOEXEC.BAT File

	@echo off
	PROMPT $P$G
	PATH=c:\PE2;C:\DOS62;C:\NC;
	APPEND=C:\PE2;C:\DOS62;
	REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
	REM ===== LANMAN 2.0 ====
	SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
	C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND
	NET START WORKSTATION
	REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
	REM ===== LANMAN 2.0 ====

// LAN Manager 2.1 or LAN Manager 2.2

// CONFIG.SYS File

	LASTDRIVE=Z
	BUFFERS = 35
	FILES = 35
	SHELL=C:\DOS62\COMMAND.COM C:\DOS62 /p /E:1024
	DEVICE=C:\HIMEM.SYS
	REM DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS ;;delete this
	DEVICE=C:\DOS62\SETVER.EXE				   ;;line
	DOS=HIGH,UMB
	DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
	DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ETH_32\ETHPCI.DOS

// PROTOCOL.INI File

	[PROTMAN]
	 DRIVERNAME = PROTMAN$
	 DYNAMIC = YES
	 PRIORITY = NETBEUI
	[NETBEUI_XIF]
	 Drivername = netbeui$
	 SESSIONS = 6
	 NCBS = 12
	 BINDINGS = "ETHPCI_NIF"
	 LANABASE = 0

	[ETHPCI_NIF]
	;------------------------------------------------------------------------
	; Sample Protocol.ini file for 32-bit PCI Bus (Fast) Ethernet Adapter
	; NDIS/2 driver
	;------------------------------------------------------------------------
	  DriverName = ETHPCI$
	; Slot = 16	      ;; {1-26}
	  SIA_Mode = AUTODETECT
	;; {SIA_Mode = TP, BNC, TP_FULL_DUPLEX, AUTODETECT}
	; DATA_RATE = MB10   ;; {MB10, MB100}
	 ; End of this sample file

// AUTOEXEC.BAT File

	@echo off
	PROMPT $P$G
	PATH=c:\PE2;C:\DOS62;C:\NC;
	APPEND=C:\PE2;C:\DOS62;
	@REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
	@REM=== LANMAN 2.1 ===
	SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
	NET START WORKSTATION
	LOAD NETBEUI
	@REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
	@REM === LANMAN 2.1 ===

-----
All trademarks or brand names mentioned are trademarks or registered
trademarks of their respective companies.

--- End of File ---

