Ŀ
	       32-bit PCI (Fast) Ethernet Adapter		
   NDIS DRIVER FOR WOLLONGONG AND PATHWAY ACCESS INSTALLATION	



The driver named ETHPCI contained in the NDIS directory conforms to the
Network Driver Interface Specification (NDIS) defined by Microsoft/3Com.


NDIS Driver Installation on PATHWAY ACCESS
==========================================
1. Insert your copy of the Pathway Drivers diskette into drive A.

2. Install the Pathway Drivers into your PC hard disk drive.
   Type the following, indicating the subdirectory where you want to install
   the program. Then press <Enter>.

	A:\> pwinstal C:

   The pwinstall program automatically installs the driver software in a new
   directory named \PATHWAY in your specified drive.  Your system will prompt
   you with the following message once the process is complete:

	     "The Pathway Drivers have been copied successfully.
	      Refer to the documentation to complete driver
	      installation."

3. Insert the Driver Diskette 1 in drive A: and copy the NDIS driver
   to the subdirectory where you want to install the Pathway software. Do
   this by typing the following command from DOS:

	A:\> Copy A:\NDIS\DOS\ETHPCI.DOS C:\PATHWAY

4. Edit the CONFIG.SYS file to contain the following command lines:

	DEVICE=C:\PATHWAY\PWTCP.SYS
	DEVICE=C:\PATHWAY\PROTMAN.EXE/I:C:\PATHWAY
	DEVICE=C:\PATHWAY\ETHPCI.DOS

5. Edit your PROTOCOL.INI file in the C:\PATHWAY subdirectory to include the
   following section:

	[ETH_32]
	     DriverName = ETHPCI$

6. Edit your AUTOEXEC.BAT file to include the following command lines:

	path=c:\pathway
	ndis [-d:#]
	pwbind

   where:
   -d	is an optional parameter used for accessing
	a specific module number within the PROTOCOL.INI.
	In your PROTOCOL.INI file, a line enclosed by
	square brackets designates the beginning of a
	new module. Each module is referred to by a
	hexadecimal number. The first module is module
	number one. The second module is module two, and so on.

---
All brand names or trademarks mentioned are brand names or registered trademarks
of their respective owners.

===End of File===
