
                         940-OD.SYS Ver 2.10

                    Winbond Electronics Corporation

                               2/26/96



Description:

  1. 940-OD.COM is a new ODI workstation driver. It is for the OS/2 environment
     only and therefore defaults to the 802.2 frame type.

  2. If there is only one 940 card, the driver will automatically get IOBASE
     and IRQ from PCI Configuration Space.

  3. If there is more than 940 card, user must indicate a specified IOBASE
     in NET.CFG file.


Installation:

  1. Load 940-OD.SYS into a floppy disk.
  2. Double-click the 'Novell' icon on the OS/2 desktop.
     If you cannot find the 'Novell' icon on the OS/2 desktop, you must install
     it first from the CD-ROM of the Netware 4.x Operation System.
  3. Double-click the 'Install' icon in the 'Novell' window.
  4. Choose 'Requester on Workstation' from the 'Installation' menu.
  5. Type the target directory and source drive in the 'Set Target Directory'
     window, and press the <OK> button when you finish.
  6. Select 'Edit CONFIG.SYS and Copy All Files' in the 'Requester
     Installation' window, and then press the <OK> button.
  7. Type the driver name 940-OD.SYS in the 'Step1:Choose the ODI LAN Driver'
     window, and then press the <Continue> button.
  8. Follow the instructions and finish the installation.
  9. If there is more than one 940 card in your system, you must add the
     following statements to the NET.CFG file:
                Link Driver 940-OD
                        port    d000            -> selected W89C940 card
  10.I you want to create or modify the NET.CFG file, you can choose 'This
     Workstation' from the 'Configuration' menu.
  11. Reboot your system.


Use:

  1. boot your computer,
  2. if you want to select another 940 card or set the Ethernet Frame Type,
        step1: double-click the *Novell* icon on the OS/2 desktop,
        step2: double-click the *Install* icon in the *Novell* window,
        step3: choose *This Workstation* from the *Configuration* menu,
        step4: modify the NET.CFG file,
        step5: reboot your system.
  1. Boot your computer.
  2. If you want to select another 940 card or set the Ethernet Frame Type,
     follow these steps.
        Step1: Double-click the 'Novell' icon on the OS/2 desktop,
        Step2: Double-click the 'Install' icon in the 'Novell' window,
        Step3: Choose 'This Workstation' from the 'Configuration' menu,
        Step4: Modify the NET.CFG file,
        Step5: Reboot your system.


Trouble Shooting:

   1. Message: 'No Winbond 940 IO card existed.'
      Solution: Make sure that your W89C940 PCI card is plugged into the
                system.

   2. Message: 'There are multiple Winbond 940 cards. Use NET.CFG to specify
               I/O port.'
      Solution: Because there is more than one 940 card in your system, you
                must use the I/O port to select a W89C940 card. This is done by
                adding the following statements to the NET.CFG file:

                        Link Driver 940-OD
                            port d000      ---> selected W89C940 card


Histories of Release:

    ***) 2.00, 01-11-1996
         This is first revision of 940-OD.SYS Device Driver for OS/2.

    ***) 2.10, 02-26-1996
